It must be remembered here that the process of distillation of the processor is quite dangerous in the absence of proper care and attention can cause instability, crashes and even system breakdown.If you are new to the topic of overclocking (from Eng. Overclocking - dispersal), you need to understand instructions to your CPU and other equipment, it is also desirable to find bridges / jumpers / menu BIOS, responsible for frequency FSB, memory bus, multiplier, dividerPCI and AGP.
«Filling» AMD Athlon 64 X2 is crystal combining two cores, each of which has its own cache L2.For the AMD Athlon processor is urgent acceleration based on the increase of the multiplication factor.

To test the CPU after distillation you will need the S & amp; M o
r like it.It can be easily found on the Internet.Download the program and install it.
distillation process begins in the BIOS.To enter the BIOS press the DEL key during the initial stage of the system boot.Click the Power Bios Setup, select it in the Memory Frequency and set the DDR400 (200Mhz).Reducing the frequency of memory will allow you to reduce limiting overclocking.Then save your changes with the option Save changes and exit, and then restart the computer.
After restarting go back into the BIOS.Click the Advanced Chipset Features and select DRAM Configuration.In the window at each point instead of Auto, set the values ​​that are right of the slash (/).This will even further postpone the limit for stable operation of your RAM.

again exit the menu Advanced Chipset Features and scroll HyperTransport Frequency.This option can also be called HT Frequency or LDT Frequency.Select it, and reduce the frequency to 400 MHz or 600 (x2 or x3).Next, go to Power Bios Setup, select Memory Frequency and set the DDR200 (100Mhz).Again, save your settings (Save changes and exit).After restart - again, in the BIOS.
begins the most interesting part - directly overclocking.Go to Power Bios Setup, select the CPU Frequency.Next you need to select the item that, depending on the version of BIOS, can be named CPU Host Frequency, CPU / Clock Speed ​​or External Clock.Increase the value from 200 to 250 MHz - this you directly overclock the CPU.Again, save your settings and load the operating system.Run the S & amp; M in the main menu and click "Start."If the check shows high stability of the system, increase the CPU Host Frequency another few points and then perform the test system.Repeat as long until you find the optimal balance between acceleration system and its stability.You have reached the goal - your CPU is overclocked.