significant drawback of modern PC components - very high heat.This is especially true of the processor and graphics card slot.It is not surprising that the system unit can become very hot, especially in high load.And if the frequency of the processor and video card overclocked, the temperature computer can rise above the norm.
for cooling computer components used radiators, to which is attached the cooler.But over time, they are covered with dust, respectively, PC components are cooled worse.That is why from time to time you need to clean the radiator from dust and dirt.To do this, unplug the computer.Open the cover of the system unit.
to clean the radiator, you can use a damp cloth.The hardest thing to dust the "edges" of the radiator.You can use a soft watercolor brush.You also need to clean the cooler and cooling.Be sure to loosen the dust the surface of the motherboard, hard drives, video cards.The result of these manipulations cooling system will operate more efficiently
.Accordingly, the overall temperature inside the system will be lower.
Alternatively, to reduce the temperature of the cooling can be installed on the hard drives.There are several types of cooling the HDD.The most simple and cheap - a small fan, which are mounted on the surface of the hard drive.There are more expensive options, such as large radiators made in a "pocket", in which the device is inserted.Of course, if funds allow, it is better to buy a radiator.He works quietly, the level of cooling is better, besides eliminating the vibration hard drive.
Reduce the temperature inside the computer can also use the regular replacement of the CPU cooler, which is installed during assembly of the PC more effectively.There are many models of fans.More expensive cooling system equipped with large radiators and coolers of large diameter.These fans at a lower speed will not only reduce the temperature of the computer and make it work significantly quieter.
Tip 2: How to lower the temperature of the CPU
To prevent damage to the CPU from overheating, it is necessary to constantly monitor his condition.Naturally, you should respond in a timely manner when the temperature exceeds the permissible limits.
- - Phillips screwdriver;
- - thermal paste;
- - SpeedFan.
First install the program SpeedFan.It is required to analyze the state of the CPU and change the parameters of the fans.Run the installed application.Explore readings of temperature sensors.If the CPU temperature exceeds the permitted limit (60 degrees in passive mode), then increase the rotational speed of the cooler connected to the CPU.
Make sure that the temperature is within the acceptable range.If not, then turn off the computer and disassemble the system unit.Unplug the power cable.Find the cooler installed on the CPU heatsink, and disconnect it from the motherboard.Now remove the device together with the radiator.
Grease the upper side of the CPU a small amount of thermal paste.Be extremely careful.In no case do not apply the paste on the CPU veins.Wipe the cloth side of the radiator adjacent to the processor.Make sure that it does not remain fibers.Install the heat sink and secure it.
Clean fan blades using a cotton pad soaked in alcohol.Get the complete absence of dust and unnecessary elements on the blades.Plug the power cable of the cooler to the motherboard.Wait 20 minutes, allowing the thermal grease distributed on the surface of the CPU.
Turn on the computer and run the program SpeedFan.Check the performance of temperature sensors.If the temperature is still too high, the visual work of the fan vote.In the event that the blades rotate slowly, replace the device with a more powerful counterpart.Try to install an additional cooler on the rear wall of the chassis.This will reduce the temperature air inside its hull.