Create a local network between the computer and a laptop in two ways: use a cable connection or a wireless network Wi-Fi.Both of these methods have their pros and cons.
- network cable, adapter Wi-Fi.
consider how to create a wired connection to a laptop computer.Get a network cable the desired length.Connect with the help of a network card and a laptop computer.
Turn on both devices and wait for the definition of a new local network.Open the configuration of the network connection on the computer.Find the item "Internet Protocol TCP / IP» and open its properties.Enter a IP-address in the appropriate field.The only rule - the numerical value of all the segments must not exceed 255.
Do the same local network settings of the notebook.If you enter the IP-address, replace the fourth paragraph.
In order to go to the computer files, working with laptop, simultaneously press Win (start) and R, and in the box that appears, type \\ 220.127.116.11, where the
numbers indicate IP-address of the computer.
If the cable connection option does not suit you, get Wi-Fi adapter.These devices are connected to the USB ports, and PCI.The latter is on the motherboard inside the system unit.
Connect the adapter to the computer and install the drivers for it.Open the Network and Sharing Center.Go to "Manage wireless networks."Click "Add" button.Click on the item "Create an ad hoc network."Click "Next".
Specify the name of the future network, select the type of security, enter your password and check the box opposite the item "Save this network".Click "Next".
Now open a list of available wireless networks on your laptop.Connect to the network that you have recently created.Make the setting of both devices as described in the second and third steps.To gain access to the files of the neighboring device, refer to the algorithm described in the fourth step.
Tip 2: How to organize a computer network
Most modern PCs connected to some computer networks.Creating such a structure allows you to quickly access the information you need.In addition, local networks allow multiple users to simultaneously work on a specific task.
- - router;
- - patch cords.
For organizations simply recommend the use of LAN switch or similar device.It should be noted immediately that provide access to the Internet through a computer switch is problematic.If you have the opportunity to purchase a router.
Connect the equipment chosen to AC power.Now prepare the required number of patch cords.In this situation, you need a cable with straight crimp connectors.With their help, connect your computer to a network switch or router.The connection must be carried out with the LAN.
If you use a router, connect the cable Internet access to the WAN port of the device.It should be noted that the cable can be connected not only to the equipment provider, but also to a stationary computer that performs the functions of the proxy server.
Adjust the settings of the router.Use of one of the computers connected to the network equipment.To simplify further customization you can use DHCP.It is important to understand that it is not always convenient to use in the office network.
If you are using a hub or not activate the DHCP function of the router, configure each PC.To do this, set the appropriate values for the IP-addresses of network cards.
Remember that experts recommend the use of IP-addresses belonging to a common subnet.If you are unable to determine the subnet mask, set the value of the PC IP-addresses that differ only in the fourth segment.
Create your own workgroup and configure security settings.This allows you to quickly add new computers to the network, turn off unneeded devices and carry out simultaneous access to shared resources.
Take care of the security of each computer.The vulnerability of a single PC may cause cracking entire LAN.
- network computer laptop