you need
  • - multiboot disk.
Guide
1
When the computer note the inscription Press ... to enter easy boot.Instead, the points will indicate the corresponding key, which is responsible for entry in this menu.In some cases, can be used not one but several keys, it all depends on the model of motherboard your laptop HP.The most commonly used input by pressing the Esc.
2
In the menu settings will expose your drive in the first place, and the local hard drive on the second.Apply changes and continue downloading computer by pressing the appropriate button to continue with the installation of the operating system or perform other actions.
3
Change boot options in the BIOS.Here you need to know the command to enter the progr
am.Most often used in HP notebooks keys ESC, Delete, F1, F2, F10 and so on.Please note that it is also possible to look at the motherboard manual or downloading on line Press ... to enter setup.Instead of points, respectively, will be spelled out the necessary commands.
4
Once in BIOS, go to Settings in the menu Boot.Set the priority device to boot your CD, select it and change the position using the +/- keys or buttons with arrows (learn more menu below may depend on the motherboard model notebook).Press F10 or other prescribed menu to save and move to the Setup menu.
5
If both points you have been exposed loading the operating system from the CD-drive and you still can not boot from disk , make sure that it is a multi-boot, are missingscratches and other damage.It is suitable for use on other computers.If you have it not multiloading, overwrite it through the appropriate programs, for example, Alcohol 120%.