Tip 1: How to connect two laptops cable

There are several ways to interconnect two mobile computer.If you decide to use a cable, then consider a few rules that will help to set up the network.
you need
  • - Network cable cross.
Guide
1
buy a power cable required length.At both ends should be positioned LAN-terminals.For a direct connection between two computers is recommended to use cables with crimp cross (crossover cable).Most modern network cards is able to determine the position of veins and adjust automatically to perform the necessary functions.
2
Turn on both the mobile PC and connect to their network adapters selected cable.Wait for a while, until the system will automatically detect the new network.When you work with the Windows Vista and Seven, select the type "Home Network" after an appropriate window.This allows you to quickly configure the network.
3
your local area network consisting of two laptops, ready to work.If a mobile computer connected to the Internet, such as through USB-modem, you can provide
network access to the second device.To do this, activate the use of static IP-addresses for the network adapter to the notebook, which is already connected to the Internet.
4
In the setting of the second device, specify the selected IP-address by typing it in the field "Preferred DNS-server" and "Default Gateway".Naturally, in this case it is also necessary to use a static (constant) IP.
5
If you joined computers in the local network for the rapid exchange of information between them, set specific permissions for shared folders.This allows you to quickly access the files you want without worrying for the safety of operating systems.Remember that the standard Windows firewall and other programs that analyze traffic may interfere with the access to your computer.

Tip 2: How to combine two laptops

Modern laptop computers at home, and in the office environment is not typically used as a stand-alone workstation, and work on remote computers.Most often it is a global network of servers, a little less - other local computers.The laptops have built-in software and hardware to connect them with each other, but this procedure can not be called a very simple.
How to combine two laptops
Guide
1
Association notebooks WLAN start with preparations for this hardware.You need to ensure the transfer of data from one computer to another - to select the most convenient way.One way - to use a router.Most of these devices can act as a wireless access point to the LAN and to provide for all network computers to connect to the Internet.Almost all modern laptops can work with the router via Wi-Fi.
2
Another way to connect computers - Cable the Ethernet.Laptops equipped with network cards, allowing you to connect them directly to the wire "twisted pair".The advantage of this method is its low cost and very high data rate.And the disadvantages that have to deal with cables - first take care of the correct order of wires connected to the connector 8, then place the cable in the room, or stretch it between different rooms.
3
Another option - connection via USB-connection with other additional devices USB-hub.This method is more suitable for those cases where it is necessary to combine several laptops not very often.It can be used as a charger - put the two plug connectors in the two computers worked and removed hub.
4
Once the connection method defined through contacted laptops installed, go to the software part of the procedure.The most common modern laptops are sold with the operating system «Windows 7 Starter."This version does not allow to create a "home group" to work together computers, so one of them it is necessary to establish a more advanced version of Windows 7.
5
Create a "home group" in one of the notebooks.To do this, open the main menu, enter "house" and click on the link "Home Group" in the search results.In this way, you run the wizard to create the group - follow the instructions.
6
Connect your laptop to set up the second group.For this purpose, as in the previous step, run the wizard.She finds an existing group, and you can use this app to connect to it by entering the password that you created during the Wizard in the previous step.
Helpful Hint
When working with laptops wiser to use their connections to Wi-Fi channel Wi-Fi.This can be done in the event that none of them is not part of a different wireless network.

Search

Related Posts

Categories