in the BIOS, or, more specifically, in the BIOS Setup Utility, you may need to adjust the parameters of the equipment.In the past, when it was necessary to load the BIOS on a desktop computer, everything is simple: boxed in at the start of the boot Delete button opened coveted access.But today, notebook manufacturers produce models, many of which have their own characteristics.Entrance to the BIOS on some of them it becomes a non-trivial task.
Usually, when loading the laptop manufacturer's logo appears.Behind it can follow anything, but at this moment, as soon as the image appeared on the screen, you need to start pressing the keys to access the Setup Utility.The time during which they can act, is only a few seconds.So the first thing to do is to get ready not to miss this moment.You can simply hold down the desired key, and you can continuously press and release it.
As a rule, the biggest challenge to access the BIOS of the laptop is the recognition of the right combinat
ions of keys.Sometimes during the download appears on the screen-tip: Press to Enter setup.But not always.When you see this prompt, then use it.If you enter the BIOS just did not work, try to do it again after the restart.Perhaps the inscription came too late, and the time when it was possible to use the council has already passed.
When loading tips not have to find out exactly the desired key, look in the handbook, which was equipped with a laptop with the purchase.In the absence of guidance, you can try to find a way to input by checking all possible.For notebooks exit the BIOS is most often carried out by pressing Del or F2.Also, the buttons can be programmed Esc, Ins, F1, F3, F10.In most cases any of these buttons helps to get into the BIOS.Some laptops can help shortcuts.You can try the following options: Alt + Enter;Alt + Ctrl;Ctrl + Esc.
If Laptop mode is a quick download, you get into the BIOS may not be possible.To turn it off, hold down the F12, it will cancel the quick loading and enter the Setup utility BIOS.This often happens on a laptop manufacturer Toshiba.
Tip 2: How to enter the BIOS to laptop
Device settings laptop stored in the BIOS - basic input / output system - «the basic input-output system."Different manufacturers provide different combinations of keys for entry to BIOS.The most common of them - is key F2, Del, Esc, or a combination of Ctrl + Alt + Esc.In fact, enter the BIOS laptop is not difficult.
- - laptop.
If the notebook is on, press the reset button.If turned off, press the power button.Be ready to immediately press the function key that launches the graphic presentation mode BIOS.As a rule, many laptop's key key to enter the BIOS is the button DEL, or some may have written the full name DELETE.
bottom of the screen (usually the left) indicates pressing a button will enter the BIOS.If you do not have time to read the labels, press Ctrl + Alt + Del and watch again.After the appearance of the launch window (usually the manufacturer's logo or a picture laptop ) press the enter the BIOS - for example, F2.Pushing to a few times, not to miss the moment.
To exit BIOS, press F10 - if you want to save the changes you make and start or Esc - if you want to undo the changes - and input.Be careful when changing important parameters related to the power supply voltage and frequency of the processor and system bus.Incorrect settings may result in damage to the computer.
Modern laptop's graphical representation mode BIOS can be completely different: the standard blue-gray with a coarse representation of the letters, and stingy management, and can be fully modified by the modern user with the mouse.Maybe just change the interface, or a different version of the system.
However, it should be noted that some users with the independent work with the system have been numerous mistakes due to ignorance of the principles of work.If you are not sure that will be able to configure the system BIOS, please contact a specialized center, where in a few minutes you will make all the necessary settings, even hold some advice on working with your computer.
BIOS stands for Basic Input-Output System.This tool not only allows the user to configure the "hardware", but also provides the interface between the operating system and hardware.Configure it should carefully since it can lead to a variety of effects.