Tip 1: How to connect your laptop to the plasma

capabilities of modern computer technology make it easy to connect laptops and computers to televisions.As a rule, this method allows to achieve higher image quality and enjoy your favorite movie, viewing it on your widescreen TV, rather than on a small laptop.
you need
  • cable DVI-HDMI
  • cable HDMI-HDMI
  • adapter HDMI-DVI
Guide
1
If you decide to connect your PC or laptop to plasma TV, you should determine the type of signal of the future.Or it is an analog signal, or - digital.The fact that the HDMI cable, for transmitting digital signals, is relatively expensive in comparison with the VGA cable, the transmitting analog signal.
2
If the diagonal of your TV more than forty inches, it is recommended to use a digital signal.The fact that high quality video images transmitted over an analog channel, will be greatly distorted.
3
Look ports for video cables, available in a laptop and a plasma TV.Find out the matching connectors.The analysis should take into account the fact t
hat DVI and HDMI ports are interchangeable, sinceBoth transmit a digital signal.
4
If the laptop is only present port DVI, as on TV - HDMI, then you can buy an HDMI cable required length and an adapter DVI-HDMI, or buy a ready-made cable HDMI-DVI.Connect the laptop to the plasma TV using purchased cable and adapter.
5
Turn on the computer and wait for the operating system.Open the properties of the screen and verify that the system has identified your TV.You now have two options for setting the transmitted image.
6
If you only want to use the TV as the primary display, the line selection screens select your TV.Set this option 'Make this the main screen. "
7
If you want the image on the laptop and the TV was the same, then activate the option "Duplicate these displays."
How to connect your laptop to the plasma
8
If you want to increase the work area of ​​a laptop screen, then select the device that is the main point, and activate the "Extend these displays."In this case, you can continue to work for a laptop, at the same time including watching video on the TV.
How to connect your laptop to the plasma

Tip 2: How to connect your laptop to the plasma television

main drawback of many laptops - relatively small size of the screen.Fortunately, this is easily compensated by connecting the mobile computer to the LCD or plasma TV .
How to connect your laptop to the plasma television
you need
  • cable HDMI-HDMI.
Guide
1
Most modern mobile computers equipped with the digital video output.Typically, it is presented as a port HDMI, but can sometimes be found and channel DVI.Purchase a cable with the appropriate ports.
2
Turn on your computer and open the menu BIOS.Make sure that the additional video outputs are not disabled.Boot to Windows.Turn on the TV.
3
Make the laptop to the TV.Wait for the Found New Hardware.Go to the settings menu of the TV.Usually it is necessary to use the remote control.
4
Select the main source of the signal port HDMI, connected to a laptop.Go to the settings of the mobile computer.Right-click on the desktop.
5
The right-click menu, select "Screen Resolution."Click "Search" and wait for the new display will be defined.Set the synchronous transfer image on the laptop screen and TV.
6
If you prefer to use the duplicate image, select the appropriate option.In this case it is recommended to change the screen resolution mobile computer so that it matches the resolution of the TV screen.
7
Some users prefer to use a separate laptop screen and TV.This method allows you to run a video player on the TV screen, without the working area of ​​the screen of the mobile computer.Activate "Extend this screen 'by pre-primary display.
8
Note that use of this technology increases the load on the graphics card.If your laptop has an integrated video chip set, make sure that the temperature does not exceed the recommended values.

Search

Related Posts

Categories