Guide
1
Please note that the touchpad on a laptop is usually a separate device, and requires the installation of the appropriate drivers and programs to succeed.Therefore, before you turn the touchpad on a laptop computer, read the instructions to the computer, which describes the features of it, and put it in the boot disk from the drive assembly.
2
Install the drivers from the boot disk or download them on the Internet by searching for the name of your laptop.You can perform the installation as an overall package of drivers, and find a separate, dedicated precisely to the touchpad.At the same time to turn the touchpad, you'll need a special program, usually included in the installation archive.Upon completion of the in
stallation process in the system tray icon should appear life.Click on it and open the service settings.With them, you can immediately disable or enable touchpad, and assign hotkeys to do.
3
Try to turn the touchpad on a laptop using preset combinations of keys on your keyboard.To do this, hold down the Fn (usually located at the bottom of the keyboard) and one of the function keys (F1 to F12).Pay attention to the buttons and find the one that is specified in the icon of the touchpad.Most often it is F6 and F7.When you press this combination, you can disable the touchpad.
4
Perform several additional actions, if after installing the drivers for the touchpad still does not work, and does not respond to pressing a special key combination.Click "Start" and then click "Control Panel".Choose "Mouse" and check the current settings of the touchpad.That there may be a button to activate or deactivate it, you need to click.Also, in some models of laptops touchpad, you can use the system menu BIOS, available by pressing the Del key immediately after booting the computer.Here tab Internal Pointing Device option to install «Enabled» to activate the touchpad.Save the settings and reboot the computer.