you need
  • - laptop;
  • - microphone;
  • - Software Sound Forge.
Guide
1
There are several ways to record your voice with the help of various programs.As the microphone is necessary to use a special device of the same name, but not the headphones, speakers and other, etc.To connect a microphone to your notebook you want to insert it into the connector plug laptop pink.When the portable device is not marked with the colors of audio jacks, be guided by the symbol next to the connectors applied.
2
then run record.To test the microphone is sufficient to use the standard software in operating systems Windows.Click "Start" menu and navigate to "All Programs."Open list of "standard" and in the "Entertainment", select "Recording".
3
In the opened window, click the "Record".At your disposal is 60 se
conds - this is the main disadvantage of this program, but you can listen to the recording and save it for later editing.To stop recording, press "Stop" and press "Play" - listen to the recorded.
4
recorded as an editor and saved files, you can use the following utilities - Sound Forge, which is also used for recording music and vocals.To the weak laptop should be fine version 6.0 or 7.0.Run this utility can be from the desktop using the shortcut or by opening the same label in the section "All Programs" menu "Start".
5
In the main window to start recording, just press the button with the red circle.In the recording, you need to set some parameters.If a microphone is used before, probably do not need to adjust.On the right side you will see the two sensors in the form of vertical stripes.Say a few words into the microphone - the state of the sensors should be changed, the microphone is OK.If changes are not followed, there is a problem with the definition of a microphone.
6
To stop recording press the button with the image of a gray square.To save a track, use the keyboard shortcut Ctrl + S. In the next window, enter the file name, type of object stored, and click "Save".