Tip 1: How to set up the modem in router mode

If your chosen service provider offers DSL-internet, you will need the appropriate modem.In case you need to connect multiple computers to this device, you can use either a multi-port modem or network hub.
you need
  • - DSL-Modem
Guide
1
If you have a single-port DSL-modem, get a device that will allow you to connect the modem to multiple computers.In this situation, the hub can be dispensed, wherein there is no ability to configure the ports.Connect using a network cable LAN port LAN hub connector Ethernet (LAN) modem.
2
Now connect through a splitter DSL-modem connector cable telephone line.Connect all the computers with LAN-port hub.Turn on one of the selected PC.
3
Run an Internet browser and go to the web interface configuration DSL-modem by IP in the address bar.Open the WAN.Select the type of data transfer protocol that is supported by your ISP.Specify the option of a IP-addresses (Dynamic or Static IP).Enter the required data for authentication to the server.
4
Save the settings and reboot the DSL-Modem.Now open a menu of additional network settings (LAN).Activate the NAT and DHCP.They are needed for the automatic distribution of IP-addresses to computers and to ensure their access to certain Internet resources.Repeat restart DSL-Modem.
5
Open the list of network connections.Go to configure the network card connected to the hub.Select the properties of the protocol TCP / IP.Check the boxes opposite the parameters "Get IP-address automatically" and "Obtain DNS server address automatically."Save the settings for the network adapter.
6
Perform the same procedure by changing parameters of the network card of other computers.Open the web interface modem and click Connect (Connect).Make sure that there is access to the Internet on all computers connected to the network hub.

Tip 2: How to set up the modem router mode

ADSL- modem can be configured as a router (router) or Bridge.In mode Bridge modem is an adapter between the computer network adapter and telephone line - in this case, all network connections are configured on the computer.In mode router ADSL- modem - a mini-server that provides computer network services.This mode is more secure and, in most cases, preferred.
How to configure the modem to router mode
you need
  • computer, AC adapter, splitter, modem, Ethernet cable, ADSL-cable, power adapter, installation CD with drivers
Guide
1
Before you set up the modem mode router, connect it to a telephone line and IDD.To do this, the connector «Line» splitter, connect the telephone line to the connector «Phone» - telephone.ADSL modem connect to the connector «Modem» splitter using ADSL-cable.Connect ADSL- modem to a power supply adapter.When properly connected splitter indicator «ADSL» on modem f should flash.Then, connect the «Ethernet» modem and the computer to the network adapter with an Ethernet cable.Indicator «LAN» on ADSL modem s should light.
2
Next you need to configure IP.In the "Start" menu, select "Settings", then "Network Connections = & gt; Local Area Connection."Next, click "Properties."On the "General" tab check "Internet Protocol" (TCP / IP).Click "Properties = & gt; Obtain an IP address automatically."Confirm your settings by clicking OK.
3
Configure Router.To do this, open the WEB-browser and in the address bar, type 192.168.1.1 or 192.168.1.2, depending on the model and modem.On the next page of authorization, in the field "Login" and "Password", respectively, enter "admin" and "admin".Exact details on the documentation that you received with your modem th.
4
After authorization, you must create an Internet connection with login and password that your ISP provides.Locate the modem settings and items that contain the field "Username" and "Password / Userpass" and enter the values ​​provided by your ISP.
5
menu settings locate points that define the connection type and value of "VPI / VCI", "Encapsulation".Connection Type select "PPPoE" or "PPPoE over Ethernet", the value "VCI / VPI" and "Encapsulation" or leave the default, or choose those that provider offers.Reboot the modem .
Note
Most 3G modems was started with drivers for Windows XP and Windows Vista, which should be fine for Windows 7. Set up 3G modem on Windows 7 is quite real.The problem lies in the fact that in automatic mode drivers are not.Therefore, it must be set manually, with 3g modem setup takes just a couple of minutes.
Helpful Hint
Getting started with your device.- Connect the telephone line to the Line port of the splitter.ADSL port DSL-2xxxU / BRU / C - port Modem.In this configuration the device is finished.If the modem is configured in the Bridge mode, then only one computer can access the Internet.If your ISP uses authentication PPPoE, you need to configure the PPPoE connection using the computer's operating system.
Sources:
  • Details routers
  • how to configure the modem to the router mode

Search

Related Posts

Categories