Tip 1: How to restore the system without a checkpoint

Upon cancellation of the operating system must use the available means to restore it.The simplest of them - the use of a control point .But, unfortunately, it does not always lead to the desired results.
you need
  • - pure DVD-ROM.
Guide
1
Alternatively restore the Windows operating system using a previously created image.Open the Control Panel of the computer and go to the "System and Security" (the method is described for Windows 7).Now open the sub-menu "Backup and recovery."Click on the item "Create a system image".
2
advised to prepare an external hard drive, because it is such a device would allow more likely to save the image of the operating system.In the menu, select the location where you want to save the system image.It is better not to use a network computer, because it may be difficult to access the created image.Click "Next".
3
In the next menu, you will see the partitions included in the image.Click "Backup" to start the process of creating a system backup.Note
that it will include all the programs currently installed in the folder Program Files.If you have used other sections to install some utilities, these programs will not be restored.
4
To use an operating system file, you will need the installation disc or recovery disc.Return to the menu "Backup and recovery."Click on the item "Create a system repair disc."After inserting a blank DVD-ROM in the drive, click "Create Disc".
5
In default OS install disk recovery drive.Turn on your computer and hold down F8.Set the DVD-ROM drive device to boot.In the menu "Recovery Methods", select "Restore system from the image."
6
In the next menu select a previously created backup of the operating system.Wait for the recovery process of the working operating system Windows 7.

Tip 2: How to restore a checkpoint

In the operation of Windows XP may be unrecoverable by conventional problems, such as the removal of system files and folders, orchange a lot of parameters of the system.To restore the system state in which it was before the failure, you can try to use the tool "System Restore", and the system files and settings will be returned to the state in which they were in the specified time.
How to restore a checkpoint
Guide
1
Open the "Start" menu and go to the "System Restore."
How to restore control
2
In the window that opens, set the "Restoring your computer to an earlier time" and click "Next".
How to restore control
3
In the "Select reference point", specify a date by which you need to roll back the system, while the right window will display the description of the selected restore point.
How to restore control
4
After clicking "Next" confirmation window appears workflow.At this stage, you need to make the right choice checkpoint, and if you want to go back to the previous step.Click "Next".
How to restore control
5
will begin the process of restoring the system, depending on the amount of recoverable parameters it can be quite long.
After the process computer will restart, and the screen displays information about the results of the work.
If the result of this action problem was not solved, you can repeat the recovery system by selecting another control point .
Note
Personal are in the process of restoring the system are not affected.
Sources:
  • both the computer back to a restore point

Search

Related Posts

Categories