computer - a thing whimsical, requiring thorough care for him, which is a regular cleaning of its internal, lubricated (if necessary) the different parts of your computer thermal paste, replacement or repair of defective parts.With a laptop, the situation is more complicated.So faulty or broken keyboard a desktop PC, you can simply replace the new one (they are cheap), but replace laptop keyboard be problematic.It remains to be removed and repaired.
should immediately warn you: the removal of the keyboard is not one of the simplest procedures.Therefore, if you are in doubt about their abilities, it is better to consult specialists.If you have the skills for the job enough, then you can start.
In most laptops, regardless of manufacturer, keyboard keep tabs included in the package.In most of these latches are four: two at the top and on the sides.Although in some laptops can not be latches.In this case, you have to remove the upper front panel above the keyboard.
Let's talk about the process of removing the keyboard.The first thing slide with a thin screwdriver to lock the upper left, and then slightly lift up the edge of the keyboard.To do this, you can hook a needle gently pull for extreme keys.If one or more buttons flew off, it does not matter.They can be glued.
Slightly raised edge of a needle, push the next clip.Then move to the place of a needle latch and slightly lift the second edge of the keyboard.Freeing third.Tab, you can already keep keyboard hand.Now all you have to release the last latch, and then pull the keyboard .
But that's not all.To disconnect the keyboard from the laptop, you need to get out of it through the trail turning up the black frames.In this issue of removing the keyboard from the laptop can be considered closed.
Tip 2: How to remove a button on a laptop
If a person often uses her laptop, sometimes you may need to remove the keyboard.Basically, the operation is carried out to clean the debris and dust.Also, you will need to not only remove the keyboard, and remove all button .In order to do this, you need to perform a few simple steps.
key on laptop basically consists of two parts.These parts are a lift and a key pad.To remove the keys you need a specific tool that is most convenient to work.This is best suited any dental hook, or a tool of engineering sets.You can just do a thin screw driver.Try to take the delicate objects to avoid damaging parts.
platform connects on certain key latches with a lift.Total connection points from three to four, but it is also very important to remember that if the three tabs, there is only one mobile connection, and if the four latches, the mobile has two connections.First you need to remove the button from the elevator, which is mounted on the keyboard.This operation is carefully and diligently to perform, since the malfunction can completely disable the keyboard, or some of the buttons.Find the same keyboard for notebook would be difficult, and it is worth a lot of money.
before removing the button, you need to know that this is done only in certain ways.To do this, you first need to insert the tool that you chose to work between the attachment points button one elevator, and having turned slightly to the side, click one of the elevator button on .Then you will need to lift the button, and only now you can click another lift by inserting the tool between the two remaining fixtures button to another elevator.Thus it is possible to remove all the buttons , moving the instrument from one elevator to another and so on.Collect the keyboard will need to reverse.With its easy-consistent action, you can easily remove button on laptop at any moment when you need it.
If you are not confident in their abilities, it is better to consult a specialist.
If during work with the keyboard you have it flexes slightly, it can be easily fixed if put under before setting her several thin napkins.