Tip 1: How to change the memory in your laptop

In order to quickly change the memory modules in the laptop , we must first find out where the slots.Then remove the lid and add a new module.Or change the old to the new memory modules.
you need
  • memory, notebook, Screwdriver
Guide
1
often occur to the owners of notebooks replacing memory.It is often simply not enough.Therefore, we can not buy a new one, but simply to improve the already existing laptop.To change the operational memory , you must first determine where it is located.We are looking for such information in the manual to your notebook or on the Internet.Often operational memory hiding cover, which is located on the back of the device.But some models memory may be under the keyboard or by the motherboard itself.In such a case would have to partially disassemble the laptop.
2
If slots for memory modules are below, and they closed the lid, simply take a screwdriver and unscrew bolts.Pre remove the battery.Then take out the plastic cover.We can see one or more memo
ry modules SO-DIMM or SO-SIMM.These are analogues of memory for desktop PCs, only shorter in length.Move aside tabs and gently remove modules.Then in the same way we put more and fasten the cover.Done.
3
If operative memory located under the keyboard or by the motherboard, it will be a little harder.We'll have to disassemble the laptop.Most often dismantling process begins with the front panel.Remove the battery, unscrew the bolts that hold the panel.Then turn over the laptop and remove the panel.Before us will bolts that hold the keyboard.Unscrew them back down the keyboard.If you want to remove it completely, you will need to disconnect the ribbon cable that goes to the motherboard.Next, look for a steel panel that hides the operational memory .Unscrew and remove the screws.So we got to the memory.Now, move aside the clips and gently pull the module.Then we put in their place a new operational memory .All actions are performed in reverse order.

Tip 2: How to replace RAM in the laptop

Unlike a home computer laptop can not be upgraded, to put it more powerful processor or replace the video card.But even in laptop you can add more RAM or simply replace spoiled.This procedure will be under the power of any user, even without relevant work experience.Just need to take some time.
How to replace the memory in your laptop
you need
  • notebook, RAM, screwdriver
Guide
1
immediately determine the type of memory that is needed for a laptop.Take it should be the operational memory , which is suitable to the interface connection on your laptop .The fact that the notebook has a lot of different options for contacts memory.There are micro-DIMM, SO-DIMM, and other variations.Simply write down all the characteristics of memory and take with you to the store.Either bring your manual with technical specifications.There you will pick up memory under your interface connection.You just need to determine the capacity of memory strip.
2
If you can afford better take more RAM, as this will not only increase the speed of the laptop, but also extend the life offline.The more memory installed on the laptop , the less work the paging file from the hard disk, and therefore, the battery lasts longer.
3
Now that you have decided and purchased the operational memory , begin the replacement process.The process is very quick and easy.Put the laptop front panel down.It is desirable to put on something soft, as in the process of unwinding the screw front panel will be pressed.
4
RAM compartment is in the middle of the body, from the bottom on the back of the notebook.Remove the screw that secures the cover which covers access to the notebook's memory.Remove the cover.Now carefully remove the memory module.Install the new memory modules.We must act carefully.The module should go smoothly.Set memory wrong is impossible.If you feel that memory does not come into contact, do not push, try to slightly change the position of the memory strip.Which side you need to insert the memory operational , clearly visible on the location of contacts.So it should not be mistaken.After installing the screw cover back.
Sources:
  • how to replace the memory itself
Note
Home in the process of replacing the RAM is not in a hurry.And be sure to remove the battery.Because RAM is sensitive to static electricity, it can easily be damaged if the battery is connected to the notebook.Stay calm and remove the memory carefully so as not to damage the thin contact groups.
Sources:
  • how to change the memory if

Search

Related Posts

Categories