Tip 1: How do I put the laptop in sleep mode

use hibernation on a computer allows you to significantly reduce the time the current session, as well as helping to achieve almost instantaneous return the system to a working state when idle.Translation laptop in sleep mode can be done either automatically or manually.
Guide
1
To get access to all the settings of the sleep mode, right-click on the desktop and select the context menu "Personalization" (for Windows Vista and 7) or the "Properties" (on Windows XP earlier).
2
click on "Screen Saver" and click on the active link "Change power settings."In the new dialog box, open the menu "Setting the Sleep Mode," and select the desired value for the team, "Put the computer to sleep mode."So you activate automatic transfer laptop mode.
3
You can set up your computer so that it goes into sleep mode when the lid is closed, and when you open it again returned to the operating state.To do this in the "Screen Saver" dialog "Personalization" go to Setting power options.
4
From the menu on the left side of the window, select the "Action when the lid is closed," and then activate the value of the "Dream" for the corresponding parameter.If you need to protect data on the computer by unauthorized persons, there is a command to activate the password prompt on waking.Then, when leaving the laptop from sleep mode to run the system without entering a password is impossible.
5
In addition, you can assign a button to switch on the notebook systemic effect "Hibernate".To do this, set the "Dream" for the corresponding parameter in the same dialog box, where you set up the action of the operating system when you close the lid.

Tip 2: How to hibernate

If you need urgently, as soon as possible to switch off a computer without resorting to a simple pull-out power cord, or you're working with a large number of programs on the preservation and discoverywhich takes a long time or your computer is too long to load while turning, you can use "Sleeping regime ».
How to hibernate
Guide
1
Often the absence of a user can be useful to put the computer into a mode in which it will consume less energy.It is known that peripheral devices such as a monitor, a processor, optical drive, etc., consume a lot of energy.If the monitor can be turned off by pressing the power button on its case, then disable parts of the system unit in a way impossible.In aid of the special operating modes of the operating system Windows, one of them - "Sleep Mode".
2
In contrast to the "standby mode", in which the computer is a low-power "sleep mode" completely turns off the computer.When in this mode, the current state of the computer (all running programs, open and unsaved documents, the entire contents of memory) is written to the hard disk, then restart the computer continues to work as if he would turn off at all."Sleep Mode" greatly accelerates the process of turning on and off the computer.
3
To use the "sleeping mode », you must activate it.
Open the properties of the screen by selecting the appropriate item in the context menu of the desktop.Go to the tab "Screensaver" and then click "Power ...".In the window that opens, select the tab "Hibernate" and check the box "Enable Hibernation."Go to the tab "Advanced" if you want the computer goes into "sleep mode" when you press the power button, select the appropriate option in the drop-down list.Click "Apply".
4
computer is now ready to move into "sleep mode", for this you can do one of the following ways: 1.Press the power button (if such a method has been activated in the settings).
2. In the "Start" menu click on "Shutdown" in the window that opens, click on the item "Standby" while holding down Shift.
3. Open the "Task Manager" (simultaneous pressing Ctrl, Alt and Delete), the menu "Shut Down" select "Hibernate".
Note
setting auto-sleep mode can be performed not only on the laptop, but also on the desktop computer.User in this case will not be different from those described above.
Helpful Hint
After all settings do not forget to confirm the changes by pressing the OK button or "Apply", otherwise the new settings will not take effect.
Sources:
  • notebooks translation

Search

Related Posts

Categories