Creating and properly configured home network allows you to quickly exchange information between devices.In addition, it is possible to simultaneously access the Internet from several PCs or laptops.
- Patch cord.
To create a network between mobile computers, you can use two basic methods: connection via patch cable or connection via Wi-Fi.If you prefer a cable connection, get a patch cable crimp reverse.
Connect LAN-connectors to network cards of both mobile computers.Turn on the laptop and wait for the boot operating systems.The first laptop, open the properties of the network adapter connected to the second mobile computer.Proceed to configuring the protocol TCP / IP.
Enter the desired permanent IP-address, such as 188.8.131.52.Click "Apply".Close the settings menu.Likewise, set a static IP-address of the network card of another mobile computer.Change last segment address, so that they are located in the same subnet.
If you do not want to use
a cable to connect laptops wirelessly to Wi-Fi.Open the Network and Sharing Center in any of the mobile computer.Select "Manage wireless networks."
Find toolbar "Add" button and click it.Select "Create a network computer to computer."Go to the following menu settings.
Set the parameters for your wireless network.Be sure to enter a strong password.Check the box next to the item "Save this network".Click "Next" and "Finish".
Go to the second laptop.Activate the search for wireless networks.Select the newly created access point and click "Connect."Wait for the installation related to the first laptop.Change the wireless adapters as described in the third step.
Tip 2: How to set up computer networks
Most providers free tune your PC or laptop when connected.But if you want to create a miniature home LAN with Internet access, data manipulation must be carried out independently.
- Wi-Fi router
- network cables
To build and customize their own home local network you need a network hub.If you are planning to provide Internet access all computers and laptops of the future network , it is best to use a router or Wi-Fi router.
Get one of these devices.When choosing between the router and Wi-Fi router should be guided by the presence or absence of laptops in the future network .
to connect to the network and computers and laptops use a Wi-Fi router.Connect the device to the cable provider.To do this, use the Internet or WAN port on the device.
Pre downloaded from the official site of the manufacturer of the equipment the latest version of the software for it.Connect your Wi-Fi router to a PC or laptop, which is the firmware file.Use any of the LAN-port.
Open your browser and enter the address in the address bar in the following format: http://192.168.0.1 , where the numbers indicate IP-address.To find out it you can read these instructions carefully.
Open "Version" or Firmware from the menu Tools.Click Browse, navigate to the firmware file, and then click Update.Reboot the router.
Open "Network Setup » or Internet Connection Setup.Fill in the fields of neodymium as required by your ISP.Be sure to enter your username and password to access the Internet.
Go to "Network Wi-Fi» or Wireless Setting.Open the wireless settings network .Specify a name and password for your future network .Specify the type of data and the option of encryption, such as 802.11g and WPA-PSK.
Save the settings.Reboot your Wi-Fi router.Connect all computers to the LAN ports devices and laptops - to a wireless access point.