Tip 1: How to sew a bag for notebook

Many people owe their life have to go on a long trip, and that they will need to bring a laptop that contains all the necessary information to work.But with the appearance of constant moving laptop will deteriorate.To his appearance is preserved, it is necessary to buy Case or a special bag for him.Personally, would you like something new and unusual, in general, is not such as all.Cover for notebook , made independently, will look very original and stylish.
Guide
1
Choose a fabric and colors for the future of the cover to the laptop.A good option for this case to be a thin skin or suede, you can certainly use the fabric, but always dense cotton or upholstery.
2
Measure the dimensions of your laptop (length, width and thickness).
Make according to the size of the pattern, which shall consist of two rectangular parts, with one part of the pattern should be about 10 cm more than the other.
3
Cut rectangles of fabric according to the pattern, you can still cut out the pattern
on the same layer of the lining and vinyl plastic film or thick waterproof.
4
Fold alternately every part of one side of the pattern, so for example, the main fabric, then dense plastic film, or a thin layer of padding polyester batting and lining fabric, do the same thing with the second part of the pattern.
5
Stitch around the perimeter of the pattern of the first one, making allowances of about 3 cm, and then the second part of the pattern.Now the received items should be prostezhit using any drawing.Then treat edge binding.
6
Connect the two parts of the pattern and sew them.After sew the Velcro tape, with one part of the tape is sewn to the shut-off valve, and then to the bottom of the envelope.You can use the same button or buttons with collar loops, but loops are not always appropriate, if you often have to open Case .
7
Case for laptop - not only a good thing for you, but also can be a good gift for friends and family, because it is made with their own hands.Of course, you can think of a lot of finishes, for example, for a woman it can be decorated with beads or stones that give it sophistication and originality.But for men, it is desirable to choose a more rigorous tone to cover, it will give it more solidity.

Tip 2: How to make a laptop sleeve

gift for a friend or husband does not necessarily buy at the store, you can do it with your hands.For example, enjoyable and rewarding surprise will be homemade Case for laptop , it will be able to appreciate all the owner of the portable equipment.
How to make a laptop sleeve
you need
  • - cloth to the front of the cover;
  • - lining fabric;
  • - foam insulation;
  • -vatin or sintepon;
  • - Bias binding;
  • - buckle (belt-loop fastener, buttons or buttons);
  • - sewing machine;
  • - thread;
  • - needle;
  • - scissors.
Guide
1
Pick a good fabric for cover from it will depend very much.For a man, choose a thin skin or suede noble color, and the female version of laptop bags can be made from cotton or upholstery fabrics in bright colors.In addition, you'll need a fabric lining, padding polyester or batting and foam insulation.
2
Measure the size of a laptop, the width, thickness and height.If you can not measure, but you know the model name, see the information on the size of the Internet.
3
calculate the size of patterns to add to the width of the thickness of the notebook and 2 cm on the free entry.To determine the length of the parts, also increase the measured length of the laptop on the thickness and 2 cm. In addition, the lower part must be longer than the upper 10 cm, to form a scent for fasteners (if you decide to do the zipper, the parts must be the same).
4
cutting with small seam allowances and cut parts of the face and lining fabric, batting or padding polyester.If possible, make a pad of any foam insulation, it protects your notebook from possible shocks and damage.Note that the insulation difficult bends and sew machine it is practically impossible, so cut parts of it without any allowances, the exact size of the laptop.
5
Add together all segments of the top, short parts - front, batting and the back, sew over the edge on three sides.If you use the foam insulation, Thread the inwards and piping close fourth.
6
Likewise, fold the bottom of the layers, put insulation, lock on three sides.Then fold the two pieces together as they will look in the finished form, sew a simple stitch over the edge.You now have a draft of a cover in the form of an envelope, with ugly rough edges.
7
Take the oblique Bakey and treat the round edge of the lower (big) part.In this part of bias binding and capture the raw part (three sides) top, so the whole case will get a neat finished appearance.
8
Sew the zipper on the bag for laptop, it can be a fastener, zipper, button.If you select a fastener buttons, use the flare loops as welt will deliver a lot of inconvenience.

Search

Related Posts

Categories