you need
  • - Screwdriver;
  • - mild knife.
Disconnect the notebook from the power supply, remove the battery and unplug the power cord.Remove all fasteners from the rear wall of the housing.
Remove the cover from the hard drive department, he's the greatest.Hook it with your fingers or not sharp knife, being careful not to damage the surface.Remove the hard drive mounting, remove it by disconnecting the wires.
Similarly, remove the drive.Be especially careful with him.Below it will be another fastening element.Remove it.Remove the memory modules (this is not necessary), unfasten the antenna Wi-Fi.
Turn the laptop monitor up, loosen the screws on the panel above the keyboard.Carefully pry it until it clicks mount
.Be careful, this is a very delicate part.Next, turn the laptop back.Carefully remove the keyboard.Disassemble it completely on the buttons is not recommended, as contained within the small fragile items that are very easy to break or lose.
Remove the power button panel using mild knife in the same manner unsnap the clips from the battery compartment, where there are only 4. Turn the laptop back.
Remove the panel, which is located underneath the keyboard, this screwdriver to pry it a bit and unsnap the clips.You will open two hidden fasteners, remove them.Carefully disconnect the touchpad, speakers and screen, especially be careful with wires and cable devices - many of them then it will be hard to get.
again turn the laptop back cover up, unsnap the main panel, remove the cooler and clean the computer from dust and dirt, and you can use a vacuum cleaner or other convenient means for you.Assembly takes place in reverse order.