Tip 1: How to Install Windows XP, Vista without removing

Many users are still familiar and comfortable to use the old but proven operating system Windows XP, but not newer versions.This is especially common in those who received the Vista OS with your computer or laptop.Making these two systems "coexist" on the same computer is possible.
Guide
1
In most cases the installation disk with Windows Vista is not available.Therefore, the first action you need to create the configuration file load two operating systems.Of Windows XP, an older system that deletes files when you install the bootloader Vista.In order not to create unnecessary difficulties, conveniently in advance of installation, set up everything you need.Start a command prompt or console.To do this, press Win + R and type the command cmd.
2
When the console window opens, type the command bcdedit / create {ntldr} / d "WinXP".Everything in quotes only used for convenience to indicate the system loader, so you can use any text.Next, enter the following command, which will determine the lo
cation of the boot loader XP: bcdedit / set {ntldr} device partition = C:
3
The following command will show the name of the boot loader: bcdedit / set {ntldr} path \ ntldr.Enter the command bcdedit / displayorder {ntldr} -addlast, it determines the order in which the output of the system at boot time, add the entry that is the Windows XP end loader Vista.These actions need to perform with rights "administrator", so use the appropriate account.
4
Next you need to create or clear the partition where you will install Windows XP.Best of all, that it was following the system disk partition.Open Computer Management.This can be done from the context menu of the computer or type in the command line, which is caused by a combination of Win + R, command compmgmt.msc.
5
Select "Disk Management".You will see a list of your logical disk partitions.Create a new partition in the unallocated space, or format an existing drive.Remember that formatting information from the partition will be deleted, please carefully.The section point out that this is the main section.
6
Boot from the installation disk Windows XP.Start the installation of the system as usual.The only difference - as for the installation, use the second partition that you created in the control panel drives.Remember that the first section you have installed Vista.
7
After installation, when booted Windows XP, download the utility bootsect.exe - it will need to recover boot Vista.Copy this program to a separate folder, such as boot is the D: drive and run the command line (Win + R).At the console, type D :, then the command cd boot, and type D: \ boot \ bootsect.exe / NT60 All.Reboot.You will see the boot menu, the two operating systems, select the desired and use.

Tip 2: How to remove Vista and install XP

many users often ask how to install Windows XP, if already installed Vista?The fact is that the system does not allow to go back to an older version and install the software.You can do this by downloading the computer in a certain way.
How to remove Vista and install XP
Guide
1
Check the system requirements, hardware and software compatibility, define the parameters of the separation disc, select the appropriate file system for the new system: FAT, FAT32, NTFS.Careful planning can make your installation of Windows more effective, helping to avoid potential problems.After you make sure that you have selected all the necessary, you can start the installation process.
2
Remove the old system and install the new one by the following method: boot with MS-DOS floppy disk, go to the command line, create a new partition command FDISK, reboot, format created partition, and then proceed to install the systemDisk.
3
Start downloading a Windows XP CD-ROM.You can press F6, if you want to install additional SCSI adapters or other storage devices.If you are prompted to provide the carrier with the driver, make sure it's right at your fingertips.The installation program will start downloading the necessary files and drivers.
4
want to install Windows XP.Press ENTER.Read the license agreement and press F8, if you take it.Select or create a partition on which you install Windows XP.
5
Run the installation and wait until all the necessary files from the installation point (CD, or network resource).Next, the computer will reboot, and installation will continue in graphical mode.
6
Click "Change regional settings", if necessary.Specify the language system, it affects the way will show the date, time, currency, and numbers.Select the current keyboard layout.
7
Enter the computer name and password for the administrator account.Install and configure network components.Next you will be asked to register your copy and make its authorization.Installation complete!

Search

Related Posts

Categories