Guide
1
To begin, save all your files and software installed on your computer, on a portable hard drive, or use the CD.
2
then rewrite the code names of computer devices.To do this, go to the "Start" menu located in the lower left corner of the screen.Select the tab "Settings", "System", "Device Manager".In the list that appears, right-click on the first device, select the tab "Properties", "Information."
3
Rewrite on a separate piece of device instance ID consisting of numbers and symbols.This operation should be done with each device that will help you in the future without any problems to install the necessary drivers to work.
4
Then select the software systems that you want to use instead of Vista.Be sure to test drive - n
ot working or damaged product will give you trouble, and take a long time to track down and install a working version.
5
Insert the boot disc into the reader drive and restart the computer.Use the "Ess" on the PC and enter the BIOS, change in the "first device to access" "Winchester" to "reader drives."Laptops automatically refer primarily to the CD.
6
again restart the computer if you had to change the settings in the BIOS, and wait for the reading of data from the boot disk.
7
Next, the system will prompt you to the next steps.First you need to format the hard drive of your computer, and then break it into segments according to the new chosen value by creating conditional drives "C" and «D».Formatting must be done in order to completely remove Vista from a computer, some files and registries manually using special programs to carry is not possible.
8
Establish a new program shell, using the hint system on drive "C".Waiting for the download is complete, enter the tab "Device Manager" and check that all devices are defined and correctly.In the case of unknown or not the devices mark the harvested earlier piece of information codes.
9
With the help of the Internet or a driver disk to locate the missing drivers necessary devices.There are special sites that automatically detects the name of the device and the correct driver for it to enact a separate window code device instance.Be sure to check that the driver is able to work under your version of the software system.
10
Now your computer is ready for further work.Transfer to disk «D» all the necessary information stored on a separate carrier, and with pleasure proceed.Necessary drivers are stored on the same disk «D» in a separate folder.This will help you in the future, if necessary, do not waste time on search and installation.