Guide
1
Prepare the workplace to fill the toner cartridge Samsung.For these purposes, ideal bathroom: waste toner, like the dust settles under the influence of moisture.
2
Protect your face from possible contamination with the help of a respirator.You can also use an ordinary gauze bandage, which you can do yourself using the available tools.Do not forget to protect your hands.Purchase at the pharmacy disposable gloves or use ordinary household rubber gloves destination.
3
Take instruments.You will need two types of screwdrivers (Phillips and slotted), wet cloth, the toner cartridge and the funnel.Then carefully remove the cartridge from the top cover.On the
side of the cartridge locate the two screws.Remove them.If this model provides additional screws holding the cover, remove them.Look at the silo.Typically, it is filled with waste toner.
4
Shake it.Do this slowly and carefully, so that it was not scattered in all directions.Once you clear the bunker, take a flathead screwdriver and use it to pull the plug.Fill a new toner cartridge Samsung.Then replace the cap into place, close the hopper and collect the cartridge.Then install it in the printer.
5
Turn on the printer.Look at the toner indicator.If it is red, despite the fact that the cartridge has just been filled, turn off the printer and open the rear cover.On the surface of a small fee must be placed chip, signed as 93 C66.
6
carefully inspect it.Find the first and fourth legs.The count should be carried out counterclockwise.Take the soldering iron and solder carefully between the jumper.Close the cover, turn on the printer.Now the meter automatically will show the initial value of the filling of the cartridge.