user who is going to install Windows (especially recent versions) from the disk in the first place must retain all the important information stored on a computer somewhere on a USB flash drive or external hard drive.After this you can start to install Windows from a disk.Otherwise, any unsaved information will be deleted from the hard disk.

BIOS settings



First, the user must install disk with the Windows operating system in your computer's optical drive and reboot.At that time, the computer begins to restart only need to press Del.It is necessary to open the BIOS settings.There needs to be done so that the computer boots from the hard drive does not, and with optical (installation CD Windows).After the BIOS is started, you need to move to Boot, and then in the Boot Device Priority.It is required to find the field 1st
Boot Device and select your optical drive.After that, go to Exit tab and click Save and Exit.

Installing Windows



When the computer starts to boot again, immediately strip will install the operating system Windows.After some time a window will appear, where the need to select a language, time format and layout.By default, all must be set to "Russian" if you get some other value, then change it with the help of small arrows (located to the right of each item), click "Next" and "Install".A new window appears where the user can get acquainted with the terms of the license agreement.If you agree with them and wish to proceed with the installation, you must set a check in "I accept the agreement" and click "Next".

The next screen will be asked two options: upgrade and full installation.It is advisable to choose "Full Installation", as before installing the system will format your hard drive.In all other cases, you can select "Update" (if it is available, and in addition, when you upgrade stored all your data and even errors that occur when you use).Then name the hard drive during installation (for example, C drive) and click on the "Next" button.In the next window, enter the special password, which is located on the packaging with the disc and continue the installation.Here it will just the procedure itself, where the only thing that is required from the user - wait for its completion.After installation is complete, you will need to create an account.Come up with your login and type in the "User Name" and your password in the appropriate section.Then set the current date and time.This completes the installation of Windows is complete.