Tip 1: Removing the system image

In some cases, you want to make a copy of running operating system, for example, when changing the place of residence and the inability to transport the system unit.In this case, the best solution is to install a special utility Acronis True Image.
you need
  • Software Acronis True Image.
Guide
1
After installation, you must reboot your computer.In the boot menu bar will appear notifying you press the hotkey F11 to automatically launch the utility, which is called "security zone".
2
Among the options, select Acronis True Image (Full Version).In the main window, select "Data archiving".You will then see the applet "Backup Wizard Acronis».Click "Next" to continue.
3
Annex "Backup Type" select "My Computer" - this allows you to save all the data and perform an exact copy, the installation will not cause errors or problems in use.Click "Next" to move to the next stage.
4
Select "Disks and partitions," then click "Next" button or press Enter.Specify the disks or partitions y
ou want to archive.Note that you can select multiple partitions, creating images you use only drives.Click "Next".
5
In the next window "Excluding Files" is a choice of 3 options that it is desirable not to celebrate becausefor the correct operation of the system requires all kinds of files.In the window-prompt "information" service message appears, which is not critical, so click "OK" and "Next".
6
In the "backup destinations", select "Secure Zone Acronis» and click "Next."Then, select "Create full backup" and press Enter.
7
the next step, place a check mark against the item "Use default settings" and click "Next".In the final window, click "Start" and wait for the image creation.After the operation is complete, restart the computer and record the image to disk.

Tip 2: How to take an image

During operation, drives in the CD / DVD-drives is their wear.To be more precise, it happens wear of the disk on which data is written.At the same time it lost the ability to read out the information from the disc.How can you extend the life of your favorite CD?The solution to this problem lies in creating the image.The image - an exact copy of your hard drive.In the disk image itself many advantages over disk: the image will never deteriorate and will not break.Ask why this is happening?Because the image can be stored on your hard drive and it is always possible to record a new disc.
Removing the image
you need
  • Software Alcohol 120%.
Guide
1
After installing the program, run it.Now you need to fine-tune the program.To do this, in the left pane, click in the "Settings" - "General".
Removing the image
2
In the window that opens, click on "Data Types".It is necessary to choose the type of disk in the appropriate section.Also activate the item "Measurement of positioning data" and will expose high accuracy.Click "OK".Global Configuration program is now complete.
Removing the image
3
In the main window, select "Create images" from the left panel.In the CD / DVD-drive select your CD / DVD-drive.In the CD / DVD-speed Select the minimum speed.In the "Data Type" select StarForce 1/2/3.If you've done everything correctly in the previous step, then you need to line up the settings automatically, ieIt will be activated item "Measurement of positioning data - Accuracy: High."Click "Next".
Removing the image
4
In the resulting window, select the directory (folder) in which to store the image of your disk.Also it is necessary to specify the speed measurement function DPM - set the value no higher than 4x speed.Click "OK" and then "Finish".Upon completion of the transaction will create an image of the main window where you will see an image file of your disk.In fact, these two files:

- * .MDF - image of your hard drive (is large);

- * .MDS - contains all the necessary information that will be useful when recording or emulation image.
Removing the image

Search

Related Posts

Categories