Perhaps for experienced PC users no secret that the LAN connection is required in order to benefit from the opportunities of the Internet.Often there are situations when it is restricted or even disabled.

reasons



There are several reasons for the appearance of such a message.The first reason - if the user's computer connected to the Internet via LAN and wire disconnected.Naturally, the solution of such a problem is only one - to connect it to a PC and create a connection to the Internet.The second reason - problems near the operator.This problem can be solved only if it is detected by the provider (the company that provides Internet services), and then it does not matter the type of connection to the Internet.There is another reason, which is a bit less common and it is due to improper use by the subscriber network equipment (including
equipment failure).

solutions to pressing problems



In any case, if you receive a message that the connection to the network is limited, first you must enter the "Network Connections".For example, go to the "Start" menu, "Control Panel", then select "Network and Internet" and the list of all the connections to find the "Local Area Connection".Then you have to press the right mouse button and on the shortcut menu, click on "Status".Then you must go to the tab "Support" where to click on the button "Correct."If problems are found, then you should disable antivirus software and firewall, and then repeat the previous manipulation.

Next, check the settings of the Internet Protocol TCP / IP.For this, as in the previous case, again you need to go to "Properties" Local Area Connection and go to the tab "Internet Protocol TCP / IP».For the stable operation of the need to do so were the following: in the fields of «DNS» and «Obtain an IP address of" you need to select "Automatic".Then you need to repeat the first step again.

last step involves implementation of some of the commands in the command line.To open it, you must go to the "Start" menu and click "Run."In the window fits command command, which opens the software required for the latest procedures.In modern operating systems, enter the command: ipconfig / release and press enter, then ipconfig / renew and then press this key.

In most cases, these operations help to solve urgent problems.Otherwise, you need to contact the technical support of the provider.