Tip 1: How to connect the right channel

Tuner - a special device that decodes the incoming signal into a format understood by the TV.At present, widely used satellite receivers that are included in the kits for satellite TV.To view it is necessary to perform the correct setting of channels.
Guide
1
tuner is connected to your TV via a cable from the kit and connectors are available.Choose the most convenient channel for the default satellite receiver.In manual mode, set the command "Channel search".It is important that the tuner has been inserted, and its screen indicates numerals.Save channel, and then you can watch it on satellite channels, switching them on the receiver.
2
Add a new channel to the tuner, the selected satellite will scan the desired transmitter.Decide first what channel you want to configure.You can use the instructions that came with your receiver or online table at http://www.tv-sputnik.com/ch_select.php.With its help you determine where a particular channel, and become familiar with its settings in the lis
t of transponders.
3
Open the menu, the tuner is responsible for setting the transponder.The section name may vary depending on the model.Set the desired transmitter.Press the remote control button Auto Scan transponder and add channels on the receiver.This operation should be carried out several times a month since satellite channel list may change.
4
Start menu of the receiver once to select the desired channel.From the "Channel Editor" go to "TV channels" and save the settings.Also, set the location where the channels will be displayed, click "OK".
5
Choose the desired satellite receiver, then click Scan.Select the desired mode: Auto, Manual, blind or network.Better set to "Auto," then do not have to customize the transponder.The tuner will automatically detect all operating transponders, which takes your dish.

Tip 2: How to connect to the channel

If your house does not have a TV - it does not matter.You can connect to your PC all your channels.To do this you need to buy a TV tuner, connect and adjust it accordingly.
How to connect to the channels
Guide
1
Buy at any computer store TV tuner to connect to channels .There are two types of TV tuners: autonomous and independent of the computer.It is best to purchase a stand-alone TV tuner, but it is more expensive and is not always practical to its dependent on the PC counterparts.
2
Carefully read the instructions that came with your TV tuner.Plug it in accordance with the instructions in the manual.If you purchased the internal TV tuner, ie,the device as a card, you will need to install it into the system unit.To do this, remove the side panel of the system unit in order to gain access to the PCI slot on the motherboard.
3
insert the TV tuner previously removing the plug from the back of the chassis.If you bought an external TV tuner, connect it via a special cable connection, which must be packaged.
4
Start your personal computer.Insert the driver disk from the TV tuner, which also are included.In parallel with the driver on your PC is equipped with a special program.She will need to view channels.The program looks like a virtual television.
5
Run.Turn it the automatic search for TV channels.Once the search is completed, place the channels in a convenient location and give them names to make it easier to navigate.Also, using a special function, you can set the time according to which "virtual TV" will automatically be included.If you want to connect foreign television channels, you will need your TV tuner to connect a satellite dish, which will significantly expand the capabilities of your PC.

Search

Related Posts

Categories