Tip 1: How to translate into safe mode

Carry out anti-virus scanning, to get rid of some of the drivers and to solve many other technical issues will allow the implementation of computer maintenance mode secure download.In the safe mode disables all advanced features loaded the only standard system services, and a basic set of drivers, which helps to solve problems of a certain type.
you need
  • computer keyboard
Make sure that all CD, DVD and USB drives, and extracted the data stored on them, are not used.
Open the "Start" menu and select "Shut down the computer."The drop-down menu, click "Restart."If the reset operation does not start for a long time, use the "Reset" button, located on the chassis.
Wait for the data on the computer manufacturer, check memory, BIOS settings, etc.These data will appear on the screen at the beginning of restart.
Press F8, which is located in the top row of keys on the keypad.Some versions of Windows at this point themselves offer press F8.It is also possible
to configure the system parameters to automatically offer to press the F8 key every time you boot the operating system.Another option is to choose the time interval for waiting for the response.
Some versions of Windows at this stage may be prompted to specify the disk that contains the OS.To select, press Enter and repeat pressing F8.
Select one of the secure boot in the open window.This window is a black screen with listed on it in white letters, options load Windows.If you select "Safe Mode" will be loaded only basic system services and a set of key drivers.
To add a standard set of network services and downloading drivers, select "Safe Mode with Networking."If there is a need
off GUI OS, then select "Safe Mode with Command Prompt."Keep in mind that navigation in safe mode is only possible with the keyboard (arrow keys), becausemouse driver is not among the basic.
Please note that the lack of action on your part will result in the automatic loading of the configuration that will be highlighted on the screen.

Tip 2: How to put the computer in Safe Mode

in safe mode, which is also called safe mode, the system boots in the minimum configuration.If volatility of your Windows due to new installed programs or drivers, diagnostic mode allows you to identify the problematic software.
After turning on the computer wait until the initial interrogation device and press on the keyboard F8.If your computer has more than one boot disk, using the control buttons ("Up" and "Down"), choose the desired system and press Enter.
In the "Advanced Options Menu" keys "Up" and "Down" Move the cursor to "Safe Mode" and confirm by pressing Enter.Window will load only those drivers, without which it will not work: system services, disks, keyboard, mouse, monitor, and video mode VGA.On the request for continuation of work in safe mode, answer "Yes", otherwise the system will start the recovery process.
If you select "Safe Mode with Networking", you will have the opportunity to work in a local network.This mode can be useful for testing computer via remote access.
in "Safe Mode with Command Prompt" instead of the Windows interface command is run cmd.exe.You will enter commands in the console window.
If you are under Windows put the display settings that are not supported by your monitor, choose the option "Enable VGA».The system loads the VGA mode with a resolution of 640x480 pixels.Click the right mouse button on an empty space on the "desktop", choose the option "Properties" and go to the tab "Options".Change the settings to those that your monitor supports.
«Last Known Good Configuration" allows you to make back-up system to a restore point created by the user or by the system.In versions of Windows XP automatically creates a restore point before installing new software or drivers.Select the point of rollback, the closest in time to the date when the problems started in the system.
If the system is automatically loaded in safe mode - this is an indication of the impossibility of a normal load.The cause may be a recently installed program or device drivers.In this case, you must use the system recovery scheme.
Helpful Hint
Besides the F8 key, you can also use the F5 key or simultaneously pressing the Shift and F8.
To exit safe mode, use the restart your computer.
  • Technical Support Kaspersky Lab


Related Posts