An operation of opening the outer port on the modem « Intercross » does not require in-depth knowledge in the field of computer resources, and can be performed by the user without any additional software.
Click "Start" to enter the main menu system, and navigate to the item "Run" to initiate the procedure of opening an external modem port « Intercross ».
Enter cmd in the "Open" and click OK to run the command-line tool.
Enter ipconfig at a command-line text box and press the Enter key to define a default gateway on the LAN connection.
Make sure that the value of the IP-address 192.168.1.1 corresponds to the browser and enter the IP-address of the modem « Intercross ».
Specify admin on fields "Username" and "Password", and then click OK to launch the web interface of the modem.
Navigate to Advance, select the sub-DNS and get the value of DNS | Firewall | Virtual Server | Routing | Antidos | Other.
Select Virtual Server, and click
the Add button in the dialog box of the application.
Apply check box on the Custom Services New dialog box and enter the name of an arbitrary value.
Select the desired type of port in the Protocol - TCP, UDP, TCP / UDP - and enter the room to be open to the outside port fields Wan Port and Server Host.Server Counter Strike these values should be: UDP and 27015 and 27016, respectively.
Specify IP-address 192.168.1.1 in the IP Address field and Server, click OK to confirm your selection.
Admin menu Go to the top toolbar of the application window and open the submenu Commit / Reboot.
Apply check box on the Commit Current Settings dialog box that opens, and click Reboot to confirm the selected application changes after the automatic reboot of the device.
Take special Reset button on the back panel of the modem to perform a forced restart if you can not reset the hardware.
- modem settings "Intercross" 5633rd
- Opening ports for "Intercross»